“The self-tapping framing screws we were previously using were garbage.  They were dull and didn’t fit onto the bit tip very well, so we would end up with a lot of screws on the floor.  We have had much better luck with Good Screws.  Thanks!”    
Mark S.   Drywall contractor foreman

“Screw stripping in light gauge metal has been a big problem for years.  The sheetrock is blamed as being too hard, then the board manufacturer blames the studs, and the stud manufacturer blames the screws.  The Good Screws virtually stopped the stripping.  The GS268 screws save us a ton of time.”
Matt S.  Drywall lead foreman

“The field guys love Good Screws in both bulk and collated, sharps and drillers.  They complain if I send any other brand to the jobsite.”
Wayne J.   Equipment manager

“I was thrilled to get Good Screws back on my job.  We were using Hilti, and my guys were not happy.  Now the crew is happy and we are getting much better production.  I have recommended Good Screws to the other foremen, and the entire company.”
Mike M.   Drywall contractor job foreman

“I had one of my best guys blind test Hilti, Grabber and Pro-Twist screws against Good Screws.  I instructed him to do the following:  Install samples of each brand's wafer-head self-drillers into 14 GA track and studs.  Time test to compare the performances.  He reported that Good Screws were definitely far superior to all of the others.”
Bob S.   Drywall construction manager 

“Good Screws are working well.  We are glad they are back and available to us.  Good Screws are much better than any of the alternatives.”
Joe B.  Purchaser

“I queried every person on my crew and it was apparent that everyone expects screws to periodically fail or perform poorly.  Dull screws are encountered and quality is what it is.  Hence, the automatic default to use tek screws for 30 mil and 33 mil studs, even for the EQ versions.  They have been using #10 framing screws or hex heads in lieu of a #8 screw, when not required by specs, just to overcome the dull screws.  After using the Good Screws in the field those problems are gone.  I am certain of the benefit.”
Mario G.   Drywall superintendent

“I had one of my most trusted workers perform a blind test on the screws and it was determined that the Good Screws sharp point board screws increased production by 10% or more when compared to three other brands we have used in the past.  And, your Good Screws GS21 self-drilling framers are so much better than other brands that it is amazing.”
Anonymous construction manager

“Good Screws wood screws are the best by far.  Cleaner, straighter, and the heads don’t break off on double layer!”
Mike S.  Drywall company owner

“Thanks for making great screws.  My field guys are so much happier. Good Screws truly fill a void in the market place.”
Rob   Commercial drywall contractor district manager

“At the beginning of the project we had extreme difficulty using Grabber and Pro-Twist framing and drywall screws into heavy gauge materials.  We even tried their American screws with the same results.  Thankfully, Good Screws worked very well and provided a significant improvement.”
Robert S.   Drywall contractor superintendent

“If you are not using Good Screws, you are wasting time and labor costs!”
Bob D.   Foreman